A6000-L2000 HYDRO - PNEUMATIC POWER TOOL

The hydro-pneumatic tool is designed to place pins (3/16", 1/4", 5/16" and 3/8") and collars at high speed making it ideal for batch or flow-line assembly in a wide variety of applications throughout all industries.

Specifications :

Air Pressure	Minimum - Maximum	5.4-8.5 bar (80-125 lbf/in2)
Free Air Volume Required	@ 5.5 bar / 80 lbf/in2	14.6 liters (.516 ft3)
Stroke	Minimum	19mm (.75 in)
Pull Force	@ 5.5 bar / 80 lbf/in2	26.7 kN (6000 lbf)
Cycle time	Approximately	3 second
Noise Level		71.8 dB(A)
Weight	Without nose equipment	5.0 kg (11 lb)
Vibration	Less than	2.5 m/s2

Downloads

A6000-L2000 HYDRO - PNEUMATIC POWER TOOL Catalogue

ENQUIRE NOW

Ensure that the correct nose assembly is fitted.
Connect the tool to the air supply.
Push the pin through the application hole.
Place the collar on the pin (orientation as shown right).
Keeping the head of the pin against the application, push the tool onto the protruding pin tail.
Fully depress the trigger. One cycle will ensure that the collar is swaged into the lock grooves of the pin and the pin breaks at the breaker groove.
Release the trigger. The tool completes it cycle by pushing it self off the collar and ejecting the pin tail at the rear.