×

A6000-L2000 HYDRO - PNEUMATIC POWER TOOL

A6000-L2000 HYDRO - PNEUMATIC POWER TOOL

The hydro-pneumatic tool is designed to place pins (3/16", 1/4", 5/16" and 3/8") and collars at high speed making it ideal for batch or flow-line assembly in a wide variety of applications throughout all industries.

Specifications :

 

Air Pressure Minimum - Maximum 5.4-8.5 bar (80-125 lbf/in2)
Free Air Volume Required   @ 5.5 bar / 80 lbf/in2 14.6 liters (.516 ft3)
Stroke Minimum 19mm (.75 in)
Pull Force  @ 5.5 bar / 80 lbf/in2 26.7 kN (6000 lbf)
Cycle time Approximately 3 second
Noise Level   71.8 dB(A)
Weight Without nose equipment 5.0 kg (11 lb)
Vibration Less than 2.5 m/s2
  • Ensure that the correct nose assembly is fitted.
  • Connect the tool to the air supply.
  • Push the pin through the application hole.
  • Place the collar on the pin (orientation as shown right).
  • Keeping the head of the pin against the application, push the tool onto the protruding pin tail.
  • Fully depress the trigger. One cycle will ensure that the collar is swaged into the lock grooves of the pin and the pin breaks at the breaker groove.
  • Release the trigger. The tool completes it cycle by pushing it self off the collar and ejecting the pin tail at the rear.