×

    • RIFBOLT®-R-FK

    RIFBOLT®-R-FK
    • RIFBOLT®-R-FK

    RIFBOLT®-R-FK

    A blind rivet stud consists of a sleeve (blind rivet nut without internal thread) and a stud that are joined to one another. As HONSEL has been manufacturing both components in-house for decades, the know-how from the manufacture of blind rivet nuts can be put to very good use also for the production of blind rivet studs so that every possible variation can be quickly and flexibly combined and supplied in order to meet individual customers’ demands with a very wide range of variants.

    Specifications

    • Head diameter (dk): 10,0 mm
    • Head height (k): 1,00 mm
    • Max. length after setting (l1 max.): 5,5 mm
    • Shaft diameter (D): 7,0 mm
    • Bore hole diameter: 7,1 mm
    • Min. tightening torque: 6 Nm
    • Min. axial tensile strength: 10000 N

    Downloads

    • Front ends
    • Roof railings
    • Bonnet / boot lid stop
    • Convertible soft tops
    • Longitudinal members
    • Spring struts

    The HONSEL-Group is one of the leading developers of blind rivet studs. RIFBOLT® blind rivet bolts are working with the same principle of operation as blind rivet nuts. Hight-strength and splash water-protected types and laser-welded versions are only two of many innovative design ideas. RIFBOLT® blind rivet studs consist of a sleeve and a screw, which are joined together by welding or crimping. As special production components, we can use different lengths and types of screws as well as almost every rivet nut sleeve.

    •